Industry
Agriculture & dry goods
สินค้าเกษตรและของแห้ง
Rice, flour, seed and feed, sold by weight, stacked on a pallet and stored in a warm, damp climate. Damp is the whole problem: a bag that lets it in ruins a germination rate or turns the flour. The pack also has to carry the weight, stack without slipping and survive being dragged, which is a mechanical brief at least as much as a barrier one.
Filled cold, not cooked in the pouch
What this category asks of the film
Eight things a pouch is asked to do. Three of them we rate here, as relative levels rather than measurements. They are the coarse filter a shortlist is drawn with. The other five are shown with the level left open, because nothing we have measured yet answers them.
- Holds air out
- Low
Oxygen is what turns oil rancid and takes the colour and the potency out of a product. It is the slowest of the three and the one that decides a shelf life in months rather than weeks.
- Holds damp out
- High
Damp is the fastest of the three to show. Water between the layers delaminates the film, and in Thai humidity a weak film can lose a product in a single wet season.
- Holds light out
- Low
Light bleaches pigment and breaks down vitamins, and a clear window lets it through as readily as an open doorway does. It is also the only barrier a buyer can see is missing.
- Takes heat
- xxxWe have not rated this one yet
A retort pouch is cooked with the food inside it, under pressure, above boiling point. A film that survives filling does not automatically survive the retort.
- Takes a knock
- xxxWe have not rated this one yet
Dry pet food and coffee beans have corners. So does a pallet on a lorry. Most failures in transit are one hole, not a whole seam.
- Seals shut
- xxxWe have not rated this one yet
Every barrier above this one is undone by a seal that opens. It is also the layer that has to close cleanly through spilled powder and oil on a filling line running at speed.
- Prints true
- xxxWe have not rated this one yet
The shelf is the only place most products meet a buyer. Gravure prints from an engraved copper cylinder, which is why the same brown holds across a run instead of drifting.
- Goes back
- xxxWe have not rated this one yet
A laminate of three different plastics cannot be recycled as any one of them. A mono-material structure can, and every year it reaches the same shelf life on more of the jobs.
One level high and two low, which is the shape of the problem. Damp ruins a germination rate or turns the flour, while oxygen and light do very little to rice or seed. The weight is the rest of the brief: the bag has to stack without slipping and survive being dragged.
Shapes that suit it
Of every shape we convert, what this category reaches for.
Structures a quote would start from
Read straight off the barrier levels above: these are the laminates that meet all three. The final structure is chosen with your product, your shelf life and your filling line in the room.
PET / NY / AL / RCPP
- PETOuter face — takes the print and the knocks
- NYToughness — takes the puncture and the drop, not the barrier
- ALBarrier — real aluminium foil, the highest barrier there is
- RCPPSealant — holds its seal at retort temperature
RetortOur plant builds this today
See this category on the formula sheetBOPP / HBOPP / RCPP
- BOPPOuter face — the cheapest print surface, and it holds off moisture
- HBOPPBarrier — coated BOPP, the way a pouch gets a barrier without leaving polypropylene
- RCPPSealant — holds its seal at retort temperature
RetortRecyclable as one materialOur plant builds this today
See this category on the formula sheetBOPP / CPP
- BOPPOuter face — the cheapest print surface, and it holds off moisture
- CPPSealant — stiffer than PE, and it runs faster on a filling line
Industry standard, not yet confirmed here
See this category on the formula sheetPET / VMPET / PE
- PETOuter face — takes the print and the knocks
- VMPETBarrier — aluminium vapour-deposited on film, blocks light like foil for less
- PESealant — melts to itself to close the pouch
Industry standard, not yet confirmed here
See this category on the formula sheetPET / AL / PE
- PETOuter face — takes the print and the knocks
- ALBarrier — real aluminium foil, the highest barrier there is
- PESealant — melts to itself to close the pouch
Industry standard, not yet confirmed here
See this category on the formula sheetPET / VMPET / NY / PE
- PETOuter face — takes the print and the knocks
- VMPETBarrier — aluminium vapour-deposited on film, blocks light like foil for less
- NYToughness — takes the puncture and the drop, not the barrier
- PESealant — melts to itself to close the pouch
Industry standard, not yet confirmed here
See this category on the formula sheet
The four figures asked first
Figures production has signed off carry a number. Figures it has not are published as blanks, not as guesses.
- Minimum order
- xxxmetres
- Lead time, first run
- 20 – 45days
- Colours in one pass
- xxxcolours
- Size and seal tolerance
- xxxmm
Questions
What buyers ask before they order
- Can it keep moisture out, keep light out, hold a vacuum, take a retort?
Tell us what the pack has to survive and the film spec is built for it. That covers vacuum, and retort for a pouch that has to take pressure and heat and come out of a boiling or steaming cycle intact.
- Can you run food and cosmetics work, and can you certify it?
Yes, for every industry — the line runs food-grade film from end to end. A certificate of analysis (COA) goes out with every production lot and every delivery.
- What are you certified to?
ISO 9001:2015, GHPs, HACCP and BRC/IoP, all certified by BSI.
A quote request, not an order — nothing is bought and nothing is charged.
Have these to hand
- What goes in the pouch, and how many grams or millilitres
- Roughly how many, and by when
- Filled hot, cooked in the pouch, or neither
- Artwork if you have it — a sketch is enough to start
We answer within two working days.